Основні причини для встановлення теплоакумулятора

What is a heat accumulator in a heating system? A heat accumulator or buffer tank (the second name) is equipment whose task is to accumulate excess heat from a heat generating device (boiler, solar collectors, etc.) in the form of a supply of hot coolant and returns it to the heating system when the heating equipment stops working. The main reason for installing a buffer tank is to protect the thermal equipment from overheating.

Is it possible to do without a battery in the system? What are the consequences of using a heating system without a battery?

Of course, you can do without a heat accumulator in the system. And many do today. Only rather it comes from ignorance of the benefits of its use. In fact, when you do not use a buffer tank in the heating system, it means that you will have to monitor the operation of the equipment more often and make sure that there is no overheating. When it comes to a heat accumulator, it is primarily about safety and comfort in the room. But in general, you can do without it.

Why do you need a buffer capacity?

The efficiency of the heat accumulator justifies the cost of purchasing and installing this equipment.
Consider the advantages of using a heating system with a heat accumulator:

Efficient combustion. Solid fuel equipment operates in a more economical mode, and at the same time, fuel consumption will be reduced by almost half; Allows you to simplify the heating process.It remains to set the desired parameter for the system;Improves the efficiency of the system.

These advantages should already be enough to understand why a heat accumulator is needed in a heating system.

But let's take a closer look at some of the points why we need a buffer tank with a solid fuel boiler. Since this is an effective home heating - the most frequently asked question today!

Normalization of temperature changes in the system

Temperature drops in a solid fuel boiler can occur for a number of reasons:

• When heated, a natural expansion of the coolant volume occurs.
• The outlet pipe of the boiler must be of the largest size. If the pipe diameter is incorrectly selected (downward), the pressure increases.
• Malfunctions of the circulation pump or an increase in power can provoke temperature drops.

In case of a decrease in pressure, it is worth inspecting the equipment for microcracks in the pipes or heat exchanger.

In this case, a good option would be to use a buffer tank, since the coolant immediately enters it, which prevents heat loss. The heat accumulator is a reserve heat fund in case of a heating equipment shutdown, and the heat will continue to flow for some time, creating a comfortable temperature in the room. Heat accumulators can also be equipped with heating elements that help maintain the temperature at the required level.

Economic efficiency of the installation

The main advantage of the buffer tank is that it serves as a kind of thermos that accumulates heat and helps maintain the set temperature in the room even when the heating equipment is turned off for a certain time. And when it comes to the economic side, of course, you can't ignore the cost of the heat accumulator and installation, plus the pump, room temperature sensor, and piping. But this aspect is relatively small when you look at the money savings when a buffer tank is installed.

The benefit is that a buffer tank with a solid fuel boiler in the system prevents it from boiling over, which leads to equipment damage. And the installation and strapping of the boiler, as a rule, is 4 times more expensive than the buffer tank in terms of cost. Also, fuel savings should not be overlooked. And in the summer, using a boiler instead of a boiler, you can reduce the cost of hot water supply.

Thus, installing a boiler together with a heat accumulator is definitely a profitable position!

Improve system efficiency

With the heat accumulator installed, the boiler operates at maximum efficiency, which eliminates the process of fuel smoldering. This, in turn, eliminates unnecessary pollution and facilitates the maintenance of solid fuel equipment and chimney cleaning. It is known that the more dirty the boiler is, the worse its thermal conductivity is. Accordingly, it is also about saving money. So, once again, we conclude that the heat accumulator improves the heating of the heating system in the room.

The ability to connect a warm floor

The figure shows a piping system with underfloor heating and a buffer tank.

What is the advantage of this combination? Installation of underfloor heating is a common practice today, as it is an additional way to heat a room. In addition, the advantage of a warm floor is to evenly distribute the heat. During the heating season, it is especially comfortable to walk on a warm surface.

In the case of installing a warm floor with a solid fuel boiler, the presence of a heat accumulator in the system plays an important role. Because it is important to continuously and without unnecessary fluctuations maintain heating within +35-40 degrees Celsius. It is this function of uniform heat supply that the buffer tank performs well.

The temperature in the room should be comfortable, and the house should be well warmed up so that you don't have to think about repair work. We hope the material you read was useful!